Modern electronic speedometers for bicycles show not only the current, but also the maximum and average speed for the entire journey, average speed, time, distance and much more. Such a speedometer is a useful purchase that can be conveniently mounted on a bicycle.
It is necessary
Speedometer, finger battery
Instructions
Step 1
Install the speedometer sensor (the kit must include special rubber bands or clamps). You may need to turn the bike over and remove the front wheel.
Step 2
Attach the speedometer magnet to the bicycle spoke. It is important that the distance from the sensor to the magnet is about 1 cm and that they are at the same level during the rotation of the wheel. In this case, it does not matter at what distance the magnet is from the axis.
Step 3
If the speedometer is wired, then the wire should be immediately pushed to the place of the future fastening of the speedometer and check if the wire rubs against the tire, does not fall into the spokes.
Step 4
Attach the speedometer stand to the handlebars of your bike.
Step 5
After fixing the speedometer to the stand, spin the wheels to check the performance.
