The design of the first roller skates, the invention of which dates back to 1743, was unfortunately imperfect. Such rollers were quite traumatic due to the fact that they could not be controlled. In modern equipment, everything is thought out to the subtleties, and rollers have the opportunity to choose roller skates that fully satisfy their preferences and requirements.
Instructions
Step 1
When planning to purchase videos, it is important to remember that the best model for each user is the one that suits his capabilities, and in which he feels comfortable and at ease.
Step 2
Choosing boots, you will be faced with the question of what to prefer - fasteners or laces, hard or soft construction. On a hard boot, the lower part covers most of the sole, almost like ski equipment. The upper part surrounds and supports the ankle. Both of these parts are connected on each side of the ankle by a movable system that allows the ankle with the boot to move forward. The hard boot has a removable padding.
Step 3
The soft boots are similar in design to hiking shoes and have an external cuff to secure the feet. Most skaters prefer these boots, believing that they are more comfortable on their feet. In addition, they are much lighter than rigid ones. Be sure to try both options to determine what is comfortable for you.
Step 4
The height of the boots depends on which direction of roller skating they were designed for. A boot with a high shaft provides a secure fit, but less flexibility. In a fitness boot, the boot is large, usually 3-4 inches above the level of the ankle bend. Special skates and skates for aggressive skating can be of different heights.
Step 5
A skate frame is attached to the bottom of the boot to hold the wheels in place. When choosing a frame, you should take into account the maximum size of the wheels corresponding to it. For the manufacture of frames, materials of three types are used: metal, composite materials and plastic.
Step 6
Thanks to the rigid plastic frame, the energy of your push will be converted into the energy of forward motion. With a bendable frame, you will have to put in a lot of effort. The metal frames that are most commonly used for hockey and speed skates are not necessarily stronger or tougher than quality plastic frames.
Step 7
Frames made from composite materials are expensive and difficult to manufacture. Such frames reduce vibration from the road surface and provide increased rigidity. Frame length, measured from the center of the rear axle to the center of the front axle, ranges from 10 to 16 inches.
Step 8
When choosing a method of fixation, remember that the system is reliable that provides the leg with reliable support without pinching it anywhere. If the leg dangles inside the boot, you will be deprived of the opportunity to have good skate control, and you will rub your calluses. As a rule, stiff boots are produced with buckles or at the same time with buckles and laces. Soft models come with laces, but sometimes they are equipped with a top belt with a buckle to strengthen the fastening.
