Snowboarders are joyful positive people, so all their equipment is colorful and made with bright colors. It is difficult to opt for one color and ornament, seeing a new pattern or “tasty” shade, an enthusiastic snowboarder wants to see them on his board. You need to have a whole palette of colors in stock and not be lazy so that your snowboard constantly sparkles like new.
It is necessary
- - emery cloth;
- - epoxy resin;
- - alkyd enamel;
- - brush.
Instructions
Step 1
Peel off the old paint layer so that there are no delamination and void bubbles. Work with a coarse emery cloth, finish sanding with zero. Carefully inspect the surface of the board, if you find pits, deep scratches and dents, seal them with epoxy. It is also called cold welding and is contained in a tube with two components. For example, there is such a tool in the Moment series.
Step 2
Achieve perfect surface smoothness. After all, all the roughness and irregularities will slow down the snowboard. Drawings on a black background look spectacular; this contrasts perfectly with the snow-white snow.
Step 3
When choosing the right paint in the store, tell me exactly for what purpose you need it. The product must be resistant to abrasion and temperature changes. Alkyd enamel is suitable for your work. Pick up a primer to it in order to better "adhere" the paint to the surface of the board.
Step 4
Cover the prepared snowboard with a primer. Let it dry following the instructions supplied with the product. Apply a second coat if necessary. Now, with a flat brush, cover the primed surface with a thin layer of paint. The layer must be necessarily thin, as this reduces the likelihood of voids and swelling if improperly dried.
Step 5
Apply the second and third coats of paint in the same way. Always adhere to the time interval specified in the instructions between application to obtain a good result. There is no need to apply varnish for finishing. This product usually cracks from temperature changes, and the cracks will slow down the sliding speed of the board.
Step 6
Apply a drawing or ornament neatly and also in a thin layer so that there are no bumps and sags of paint. Use a stencil or your artistic ability, your board will reflect the mood and fighting spirit of the owner.
